3105 h14 aluminum coil Factory price Manufacturer Supplier Manufactory direct
3105-H14 aluminum is 3105 aluminum in the H14 temper. To achieve this temper, the metal is strain hardened to a strength that is roughly halfway between annealed (O) and full-hard (H18). The graph bars on the material properties cards below compare 3105-H14 aluminum to: 3000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Specified Thickness(in) | Tensile Strength - KSI | Elongationin 2 inches % | |||
---|---|---|---|---|---|
Ultimate | Yield | ||||
Min | Max | Min | Max | ||
0.013 - 0.019 | 22 | 29 | - | - | 1 |
0.020 - 0.031 | 22 | 29 | - | - | 1 |
0.032 - 0.050 | 22 | 29 | - | - | 2 |
0.051 - 0.080 | 22 | 29 | - | - | 2 |
Si Silicon | Fe Iron | Cu Copper | Mn Manganese | Mg Magnesium | Cr Chromium | Ni Nickel | Zn Zinc | Ti Titanium | Others Each | Total | Total Aluminum Min |
---|---|---|---|---|---|---|---|---|---|---|---|
0.6 | 0.7 | 0.3 | 0.3 - 0.8 | 0.2 - 0.8 | 0.2 | - | 0.4 | 0.1 | 0.05 | - | Remainder |