5052 Mobala oa H32 oa Mobala oa Aluminium Coil

Selelekela

The 5052 Mobala oa H32 oa Mobala oa Aluminium Coil ke ntho e fapaneng, lisebelisoa tse phahameng tsa ts'ebetso tse kopanyang melemo ea mochini ea 5052 motsoako o nang le mokhabiso, ho roala bokahodimo bo sireletsang.

Kahong ea kajeno, sepalangoang, le liindasteri tsa thepa ea bareki, tlhokeho ya boima bo bobebe, e thibelang ho bola, le thepa aesthetically tenyetsehang ha ho mohla e phahameng.

The 5052 H32 temper e fana ka motsoako o leka-lekaneng oa sebopeho le matla, ha mokhoa oa ho roala ka mebala o eketsa lesela le tšoarellang le ka etsoang ho lumellana le letšoao, moralo, kapa ditlhoko tsa tshebetso.

Sengoliloeng sena se hlahloba likarolo tsohle tsa 5052 Mobala oa H32 oa Mobala oa Aluminium Coil-ho tloha ho sebopeho sa eona sa lik'hemik'hale le thepa ea mochini ho ea ho tlhahiso, lits'ebetso, mekhoa ea khetho, le lithuto tsa maemo a sebele tsa lefats'e.

Qetellong, babali ba tla utloisisa hore na ke hobane'ng ha thepa ena e le khetho e ratoang bakeng sa litsebi tsa meralo, baenjiniere, le bahlahisi, le mokhoa oa ho e lekola khahlano le litharollo tse ling.

Re boetse re totobatsa kamoo Huawei Aluminium lisebelisoa tsa premium 5052 Likhoele tse koahetsoeng ka 'mala oa H32 ho fihlela litlhoko tse batloang haholo.

1. Ho utloisisa 5052 Motsoako oa H32

1.1 Sebopeho sa Lik'hemik'hale

The 5052 alloy ke ea letoto la 5xxx (e thehiloeng ho magnesium) 'me e tumme ka ho hanyetsa ho bola ha eona hantle le ho cheseha ha eona.

Motsoako o tloaelehileng oa lik'hemik'hale oa 5052 e akaretsoa tafoleng e ka tlase (litekanyetso li fanoa ka boima ba 'mele).

Lebaka leo sena se leng bohlokoa: Lintho tsa magnesium li fana ka matla a phahameng ha li ntse li boloka ductility, 'me chromium e ntlafatsa ho hanyetsa ho bola, haholo-holo libakeng tsa leoatle.

1.2 Thepa ea Mechini ho Mofuthu oa H32

Khalefo ea H32 e bolela boemo bo thata-thata le bo fokolang, ho fana ka motsoako o itekanetseng boemo ba matla le sebopeho se setle.

Meetso e tloaelehileng ea 5052‑H32 ke:

Maemo ana a boemo ba 5052‑H32 lipakeng tsa 3003‑H14 e hlophisehileng haholoanyane le matla a holimo 6061‑T6., ho etsa hore e lokele dikopo tse hlokang ka bobedi sebopeho le botshepehi ba sebopeho.

1.3 Khanyetso ea Corrosion

5052‑H32 e etsa lera le tsitsitseng la oxide le sireletsang tšepe e ka tlase ho kutu ea sepakapaka le ea leoatleng..

Ha e kopantsoe le 'mala oa boleng bo holimo, thepa e fihlela mokhoa oa ts'ireletso oa makhetlo a mabeli:

• Tšireletso ea mokoallo: Filimi ea pente e thibela mongobo le li-ion tse mabifi.
• Tšireletso ea Cathodic: Aluminium substrate e senya butle ho feta tšepe.

Synergy ena ke ka lebaka leo hangata likhoele tse koahetsoeng ka mebala tsa 5052‑H32 li hlalosoang khafetsa bakeng sa kaho ea lebopo., ho rulela, le matshwao a kantle.

1.4 Liqeto tsa Bokaholimo le Likhetho tsa Mebala

Ts'ebetso ea ho roala mebala e ka fana ka mefuta e mengata e fapaneng:

Mebala e tloaelehileng e ka bapisoa le RAL efe kapa efe, Pantoni, kapa phalete ea mong'a ntlo, ho nolofalletsa litsebi tsa meralo ho fihlela lipono tse nepahetseng tsa moralo.

2. Mokhoa oa Tlhahiso ea 5052 Mobala oa H32 oa Mobala oa Aluminium Coil

2.1 Khetho ea Lintho tse tala

Ts'ebetso e qala ka li-ingots tsa aluminium tse hloekileng haholo (≥99.5% Al) tse kopantsoeng le magnesium le chromium ka tekanyo e nepahetseng.

Alloy e qhibilihisoa ka sebōping sa reverberatory, degassed, le ho akheloa ka matlapeng kapa li-ingots.

2.2 Hot Rolling le Cold Rolling

1. Hot Rolling: Letlapa le futhumatsoa ho ~ 550 ° C 'me le fetisetsoa letotong la liloala tse thata le tse qetellang ho fokotsa botenya ho hoo e ka bang 3mm..
2. Cold Rolling: Thepa e kolobisitsoeng e chesang e ntan'o phuthoa ho fihlela botenya ba ho qetela (hangata 0.2mm - 3.0mm). Ho sebetsa ka mokhoa o batang ho baka khatello ea maikutlo, ho phahamisa boemo ba matla ho ea ho temper ea H32.

2.3 Kalafo ea Mocheso (Ho fihlella H32 Temper)

Ka mor'a hore ho pholile ho bata, lesela le etsoa a karolo e itseng (ka tloaelo ho 260 ° C - 345 ° C bakeng sa 1-2hours) mme ke ka nako eo tsitsa ka tatellano ya ho phodisa e laolwang.

Motsoako ona o fana ka mocheso oa H32, e lekanyang matla le sebopeho.

2.4 Phekolo ea pele ea sefahleho

Pele ho koaheloa, bokaholimo ba aluminium bo hloekisoa ka mohala oa mekhahlelo e mengata:

• Ho hloekisa alkaline ho tlosa dioli tse bilikang.
• Ho khaola ka acid ho tlosa li-oxide.
• Chrome-free conversion coating (kapa e thehiloeng ho zirconium) ho matlafatsa ho khomarela le ho thibela kutu.

2.5 Primer Coating

Lera la pele (hangata 5–10µm) e sebelisoa ka roll-coating, fafatsa, kapa ho roala lesira.

The primer e ntlafatsa ho khomarela topcoat mme e fana ka mokoallo o eketsehileng.

2.6 Kopo ea Topcoat

The topcoat (15-30µm) e sebelisoa ka mokhoa o ts'oanang, sebelisa leha e le efe thermosetting (polyester, PVDF) kapa thermoplastic (polyurethane) resin.

Lebelo la mohala, mocheso, le barbotage boima ba ka thata-thata laoloa ho finyella junifomo botenya le mebala e tsitsitseng.

2.7 Pheko le Taolo ea Boleng

Lesela le koahetsoeng le feta ka har'a a convection kapa onto ea infrared moo ho kolobisoa ho folisang ho 150°C -220°C, ho itšetlehile ka tsamaiso ea resin. Ka mor'a ho folisa, khoele ke:

• E hlahlojoa bakeng sa botenya, ho khomarela, kganya, phapang ea mebala, le mefokolo e ka hodimo.
• Lekoa bakeng sa tenyetseha (teko ea kobeha), khanyetso ea tšusumetso, le boemo ba leholimo (QUV e potlakisa botsofali).

Litlhaloso tsa li-coil feela tsa kopano (mohlala, Setšoantšo sa ASMA653, A924, kapa EN1396) lia pakoa ebe lia romeloa.

3. Likopo le Maemo a Tšebeliso

3.1 Kaho & Meaho

• Ho rulela & Ho roala: 5052Likhoele tse koahetsoeng ka 'mala tsa ‑H32 li sebelisoa bakeng sa marulelo a moroho o emeng, marako diphanele, le li-rainscreens. Sebopeho sa bona se bobebe se fokotsa moroalo oa sebopeho, 'me qetello ea PVDF e etsa bonnete ba hore mebala ea 20-plus-year e boloka mebala.
• Li-sunshades & Li-canopies: Sebopeho sa thepa se lumella lipaterone tse rarahaneng tsa laser-cut ha li ntse li boloka matla.
• Lisiling tse ka Hare & Liphanele tsa Lerako: E fumaneha ka mekhoa e fapaneng (boreledi, kentse, metallic) ho fihlela sepheo sa botle.

3.2 Lipalangoang

• Koloi ea Likoloi: Liphanele tsa mamati, matlalo a dashboard, le likhoele tse khabisitsoeng ka hare li rua molemo ho sebopeho sa coil le boleng ba bokaholimo.
• Likoloi tsa Terene: Liphanele tse bobebe tsa kahare li ntlafatsa ts'ebetso ea mafura le ho fokotsa tlhokomelo.
• Marine Hulls & Likarolo tsa Deck: Sekoaelo se thibelang ho bola se sireletsa khahlanong le metsi a letsoai, e etsa hore e be e loketseng bakeng sa liphanele tse nyane tsa likepe le li-yacht tse ka hare.

3.3 Lisebelisoa tsa Motlakase

• Li-Liners tsa Sehatsetsing: Ponahalo ea coil le bokaholimo bo hloekileng habonolo ke tsa bohlokoa ho lisebelisoa tsa lapeng.
• Litsela tsa HVAC: Li-coils li fana ka nako e telele, sebaka se khonang ho penta bakeng sa likarolo tsa ho tšoara moea.

3.4 Letshwao & Branding

• Phatlalatso ea Kantle: Matšoao a phahameng a bonahala a sebelisa khanya, Mebala e tsitsitseng ea UV e thibelang ho fifala.
• Retail Fixtures: Mebala e ikhethileng e etsa hore ho be le lisebelisuoa tsa mabenkele tse sa fetoheng le libaka tsa ho reka.

3.5 Thepa ea ka tlung & Moqapi oa ka Hare-hare

• Thepa ea Ofisi: Litafole, partitions, le likhabinete tsa ho faela hangata li na le liphetho tse kang phofo tse fihlelletsoeng ka likhoele tsa 5052‑H32..
• Lisebelisoa tsa Mabone: Libaka tse bonahatsang khanya li ntlafatsa khanya ha li ntse li lumella moralo o bonolo.

Sephetho: Façade e ncha e fokolitse nako ea ho kenya ka 30% (ka lebaka la bophara bo boholo ba khoele) 'me e fihletse phokotso ea 15% ea boima ba lerako ka kakaretso, ho kgontsha tshebediso ya moralo o bobebe. Tšebeliso ea matla ea mohaho e theohile ka 8% ka lebaka la ho roala hamonate.

4. Ho Khetha Le letona 5052 Mobala oa H32 oa Mobala oa Aluminium Coil

4.1 Mehopolo ea Botenya le Bophara

Molao oa letsoho: Likhoele tse teteaneng li fana ka matla a holimo empa li eketsa litšenyehelo tsa thepa; Likhoele tse pharaletseng li fokotsa seam empa li ka hloka ho tšoaroa ka mokhoa o khethehileng.

4.2 Mofuta oa ho roala (Polyester, PVDF, etc.)

• Polyester (PE): Molemo ka ho fetisisa bakeng sa lisebelisoa tsa ka hare kapa moo litšenyehelo e leng mokhanni ea ka sehloohong. Nako e tloaelehileng ea bophelo ke lilemo tse 10-15.
• Polyurethane (PU): E fana ka tekanyo ea litšenyehelo le ts'ebetso; e ntle bakeng sa thepa ea ka tlung le ka hare ho likoloi.
• PVDF (Fluorocarbon): Khetho ea premium bakeng sa kantle ea meralo, e hloka nako e telele ea lilemo tse 20+.

4.3 Litlhoko tsa ho Bapisa Mebala le Litlhoko tsa Bokhabane

Hlalosa mamello ea mebala (ΔE≤0.5 bakeng sa merero ea meralo) le boemo bo phatsimang (30 -90 GU). Kopa a chip ea mebala kapa sampole setšeng pele ho taelo e ngata.

4.4 Boikamahanyo le Disetifikeiti

Netefatsa hore coil e kopana le maemo a nepahetseng:

• ASTM A653/A924 (Tšepe) - ha e sebetse empa e bua ka litekanyetso tsa ho roala.
• EN1396 - Aluminium le lisebelisoa tsa aluminium - lihlahisoa tse koahetsoeng ka li-coil.
• ISO9001 - Sistimi ea taolo ea boleng ba moetsi.
• LEED / PHOMPHO – Litokomane tsa litaba tse recycled (hangata 20‑30% ea aluminium e sebelisoang hape).

4.5 Litšenyehelo vs. Tshebetso

Leka-lekanya lintlha tsena khahlanong le bophelo bo lebelletsoeng ba tšebeletso le tekanyetso ea tlhokomelo.

5. Papiso le Lintho Tse Ling

5.1 5052‑H32 vs. 3003‑H14

Tsa tsau-tsau: Khetha 5052‑H32 ha ho hlokahala matla a holimo le ho hanyetsa ha kutu; khetha 3003‑H14 ha ho hlokahala ductility e ngata.

5.2 Aluminium vs. Tšepe

Qetello: Aluminium e fana ka karo-karolelano e phahameng ho feta boima ba 'mele, bophelo bo bolelele ba ho roala, le botsitso bo betere, leha e le ka theko e phahameng ea pele.

5.3 Aluminium e Kentsoeng ka Mebala vs. Tšepe e Apesitsoeng ka Powder

Bakeng sa merero e meholo e hlokang ponahalo e ts'oanang le ho kengoa ka potlako, likhoele tsa aluminium tse tlotsitsoeng ka mebala ke khetho e sebetsang haholoanyane.

6. Litaelo tsa Tlhophiso le Tlhokomelo

6.1 Ho Tšoara le ho Boloka

• Boloka sebakeng se omileng, tikoloho e nang le moya; qoba khanya ea letsatsi e ka bakang keketseho e bakoang ke mocheso.
• Sebelisa li-slings tse seng tsa tšepe ho thibela mekgoapo e ka hodimo.
• Boloka li-coils e otlolohileng holim'a liphalete; qoba ho bokella dikhoele tse fetang tse tharo hodimo.

6.2 Ho Seha le ho Etsa

• Ho kuta e sebetsa hantle bakeng sa li-gauge tse nyane (< 1mm).
• Ho itšeha ka laser e fana ka lithōle tse hlakileng ka li-burr tse fokolang.
• Ho theha mariki a CNC e ka finyella litlaleho tse rarahaneng; etsa bonnete ba hore bend radii ≥2 × botenya ho qoba ho petsoha ha lera.

6.3 Ho kopanya Mekhoa

6.4 Tlhoekiso le Tlhokomelo

• Ho Hloekisa ka Ka mehla: Sebelisa borashe bo bonolo kapa lesela le nang le sesepa se bobebe (pH6–8). Hlatsoa ka metsi a hloekileng.
• Ho Tlosa Letheba: Bakeng sa graffiti kapa oli, etsa kopo a sehloekisi se sa chesehang e entsoeng ka ho khetheha bakeng sa aluminium e koahetsoeng. Leka sebakeng se senyenyane pele.
• Tlhahlobo ea Nako le Nako: Selemo le selemo hlahloba seams, fastener botšepehi, le ho roala bakeng sa chips kapa mengwapo. Lokisa ka potlako ka a pente ea ho thella e khothalletsoang ke morekisi oa li-coil.

7. Tšusumetso ea Tikoloho le Moshoelella

7.1 Recyclability

Aluminium ke e 'ngoe ea litšepe tse ka sebelisoang hape: ≈95% ea aluminium e ka sebelisoa hape ntle le tahlehelo ya thepa.

Likhoele tse koahetsoeng ka mebala li ka qhibiliha hape; sekoaelo sa manyolo se tuka ho ~ 600°C, ho siea tšepe e hloekileng bakeng sa ho sebelisoa hape.

7.2 Matla a Matla

• Matla a tlhahiso: Ho hlahisa 1t ea aluminium ea mantlha ho ja ~ 15MWh, empa recycle e sebelisa feela 5 % ea matla ao.
• Tšebelisong ea matla: Mofuta o bobebe oa aluminium o fokotsa tšebeliso ea mafura a lipalangoang. Moaho o tloaelehileng oa façade o sebelisang aluminium ea 1mm e boloka ~ 30kg ea tšepe, ho fetolela ho ~ 0.2tCO₂ ho 100m² ea ho koala.

7.3 LEED / BREEAM Credits

Ho sebelisa aluminium e koahetsoeng ka mebala ea 5052‑H32 ho ka kenya letsoho mekhahlelong e mengata ea setifikeiti.:

• MRCMokoloto (Lisebelisoa & Lisebelisoa): Litaba tse recycled (moreki ea ka morao + pele ho moreki).
• IEQCredit (Boleng ba Tikoloho bo ka Hare): Liaparo tse tlase tsa VOC (PVDF ≤20g/L).
• EAC mokoloto (Matla & Sepakapaka): Enfelopo e ntlafalitsoeng ea moaho e fokotsa moroalo o futhumatsang / o tsiditsang.

Tokomane ea Phatlalatso ea Sehlahisoa sa Tikoloho (EPD) ho tsoa ho morekisi oa hau ho nolofatsa tlhahiso ea mokoloto.

8. Theko le Theko

8.1 Mekhoa ea Theko ea Marakeng

Joalo ka 2024, the theko ea 5052‑H32 ea likhoele tsa aluminium tse koahetsoeng ka mebala e feto-fetoha pakeng tsa USD2,800 le USD3,500 ka tone ea metric (FOB China), ho ipapisitsoe le:

• Theko ea motheo ea aluminium (London Metal Exchange ~ USD2,200/t).
• Mofuta oa ho roala (PVDF premium ~ USD400/t).
• Botenya & bophara (likhoele tse pharaletseng/tse teteaneng li laela tefiso).

8.2 Lintlha tse Amang Litšenyehelo

8.3 Ho fumana ho tsoa ho Huawei Aluminium

Huawei Aluminium ke moetsi ea ka sehloohong oa likhoele tsa aluminium tse tlotsitsoeng ka mebala, nyehelo:

• Mehala ea tlhahiso e felletseng e khona ho ba bophara ba 1,800mm le botenya ho tloha ho 0.2mm ho isa ho 3.0mm.
• Mekhoa e tsoetseng pele ea ho roala (PVDF, PE, PU, epoxy) e nang le mamello e thata (±2µm).
• Ho lumellana ha mebala ho sebelisa taolo ea spectrophotometric; linako tse etellang pele li le khuts'oane joalo ka matsatsi a 10 bakeng sa mebala e tloaelehileng.
• Teko e felletseng – ho kenyeletsoa QUV, Letsoai-Hasa, Kobeha, le Gloss - ka tlung ho netefatsa ts'ebetso.
• Setifikeiti - ISO9001, ISO 14001, OHSAS18001, le ho tšoaea CE bakeng sa merero ea Europe.

Ha o kopa qotso, fana ka lintlha tse latelang ho potlakisa ts'ebetso:

1. Botenya bo hlokahalang & bophara (mm).
2. Mofuta oa ho roala (PE, PVDF, etc.).
3. Khoutu ea mebala (RALALA, Pantoni, kapa mohlala).
4. Odara bongata (lithane).
5. Sebaka sa delibari (boemakepe kapa monyako).

9. FAQs Mabapi 5052 Mobala oa H32 oa Mobala oa Aluminium Coil

9.1 "H32" e bolela'ng??

Lebitso la "H32" ke karolo ea Aluminium Association e halefile tsamaiso. E bontša hore motsoako o bile teng thatafatsoa (hatsetsoang) 'me ka mor'a moo e anneal ka mokhoa o itseng ho isa boemong bo itseng ba matla le sebopeho. "H3" e bolela a tsitsa bohale (i.e., thepa e thatafalitsoe, ebe o fuoa kalafo ea mocheso o tlase ho thibela ho kokobela ha nako). "2" e bolela ka ho toba boemo ba ho thatafala (2 -4% e fokotsehile).

9.2 Na 5052‑H32 e ka tšelisoa?

Ee, 5052‑H32 e ka chesetsoa ka ho sebelisa 'NA kapa TIG ditsamaiso. Hobane ke motsoako o sa phekoleheng mocheso, sebaka sa weld se tla ba le tahlehelo e nyane ea matla (≈10‑15%). Sebelisa a 4043 kapa 5356 motsoako oa ho tlatsa bakeng sa liphetho tse ntle 'me u nahane ka kalafo ea mocheso oa post-weld haeba karolo e tla ba tlas'a khatello e matla.

9.3 Koala ea 'mala e nka nako e kae?

Nako ea bophelo e itšetlehile ka mofuta oa ho roala:

• Polyester (PE): 10-15years maemong a leholimo a itekanetseng.
• PVDF (Fluorocarbon): 20- lilemo tse 30 tse nang le ho fokola ho fokolang (< 5ΔE).

Ho kenya le ho hloekisa kamehla ho ka eketsa bophelo ba tšebeletso.

9.4 Ke nako efe e tloaelehileng ea ho etella pele bakeng sa taelo ea mebala e tloaelehileng?

Bakeng sa mebala e tloaelehileng (mohlala, RAL9002,RAL7016), nako ea ho etella pele ke 7-10 matsatsi kamora netefatso ya taelo. Mebala e tloaelehileng (e seng stock) hangata hloka 14- matsatsi a 21 ka lebaka la ho bapisa mebala le tlhahlobo ea lihlopha.

9.5 Ke 5052‑H32 e loketseng tikoloho ea leoatle?

Ee. Alloy ea boleng ba magnesium e fana ka khanyetso e babatsehang ho ho bola ha metsi a letsoai, le ea Ho roala ha PVDF e eketsa mokoallo. Tse ngata liphanele tsa sekepe sa sekepe, likoahelo tsa boema-kepe, le likarolo tsa kaho tsa leoatle sebelisa likhoele tse koahetsoeng ka mebala tse 5052‑H32.

9.6 Na coil e tla le setifikeiti?

Bafani ba thepa ba hlomphehang, ho kenyeletsa Huawei Aluminium, fana litifikeiti tsa teko ea leloala (MTC) tse kenyeletsang:

• Sebopeho sa lik'hemik'hale (tlhahlobo ea spectrometer).
• Thepa ea mechine (tsitsinyeha, Khefutsa, elongation).
• Botenya ba ho roala le liphello tsa ho khomarela.

Ho phaella moo, e EPD (Phatlalatso ea Sehlahisoa sa Tikoloho) e ka fanoa bakeng sa merero ea kaho e tala.

9.7 A na nka fumana sampole pele ke etsa odara e ngata?

Ruri. Boholo ba bahlahisi ba fana mehlala e hlobolisa (hangata 0.5m×0.5m) bakeng sa ditjeho tse itseng kapa mahala, ho itšetlehile ka tekanyo ea morero. Ho kopa sampole ho khothaletsoa ka matla ho netefatsa 'mala, kganya, le barbotage adhesion.

9.8 Ke lokela ho bala boima ba khoele joang?

Foromo e otlolohile:

[
\mongolo{Boima ba 'mele (kg)} = mongolo{Bolelele (m)} \linako mongolo{Bophara (m)} \linako mongolo{Botenya (mm)} \linako mongolo{Botenya (2.68 g/cm³)}
]

Ka mohlala, khoele e bolelele ba 1,000m, 1,200 bophara ba mm, le boima ba 0.8mm:

[
1{,}000 \linako 1.2 \linako 0.8 \linako 2.68 = 2{,}572 \mongolo{ kg}
]

10. Qetello

The 5052 Mobala oa H32 oa Mobala oa Aluminium Coil e hlahella e le ts'ebetso e phahameng, tenyetsehang ka botle, le thepa ea moshoelella bakeng sa mefuta e mengata ea liindasteri.

Motsoako oa eona o ikhethang oa matla a mochini, khanyetso ea kutu, le sebopeho-tse kopantsoeng le se tšoarellang, ho roala mebala ka mokhoa o ikhethileng-e etsa hore e be khetho e nepahetseng bakeng sa meaho ea meralo, lipalangoang ka hare, lisebelisoa tsa lisebelisoa, seka, le lisebelisoa tse ling tse ngata.

Ha u khetha coil, nahana ka botenya, bophara, mofuta oa ho roala, le ho ikamahanya le maemo a amehang. Etsa tlhahlobo ea litšenyehelo tse amanang le litšenyehelo tsa pele tsa thepa le ho boloka nako e telele ea tlhokomelo..

Ho sebelisana le mofani oa thepa ea nang le boiphihlelo joalo ka Huawei Aluminium e etsa bonnete ba hore o fumana sehlahisoa se kopanang le litlhaloso tse nepahetseng, tšehetso ea botekgeniki, mangolo a mangolo, le litheko tsa tlholisano.

Hore na o rala façade ea sejoale-joale, ho hlahisa koloi e ncha ka hare, kapa ho totobatsa likarolo tsa morero oa metsing, the 5052 Mobala oa H32 oa Mobala oa Aluminium Coil e fana ka nako e telele, botle, le ts'ebetso eo u ka itšetlehang ka eona.

Ikopanye le Huawei Aluminium kajeno ho buisana ka litlhoko tsa projeke ea hau le ho fumana mantsoe a qotsitsoeng a lumellanang le pono ea hau ea moralo le tekanyetso..

Sengoliloeng sena se reretsoe ho fana ka tataiso e akaretsang. Bakeng sa liqeto tse khethehileng tsa boenjiniere, buisana le moenjiniere oa meralo ea tšoanelehang kapa setsebi sa thepa.

Arolelana le PDF: Khoasolla